ISO 9001 certified Baylorr rebar line plus exclusive UAE distribution of EdilPro premium processing equipment. P-42 flagship, RB25 single-phase, C-42 cutter — 48-hour UAE delivery, in-shop workshop repair.
Rebar is the steel skeleton inside every concrete structure in the UAE — from Dubai Marina towers to Abu Dhabi Corniche developments to the villas going up across Ajman. Getting rebar shaped right matters structurally, and getting it shaped efficiently matters commercially.
AMACO supplies rebar bending and cutting equipment across two complementary lines. Baylorr, our own brand, covers the 3-phase flagship P-42 bending machine, the single-phase RB25, and the C-42 cutting machine — all ISO 9001 certified and backed by full workshop repair at our Ajman facility. EdilPro, the specialist rebar processing brand for which we are the exclusive UAE distributor, covers the premium end of the market.
Rebar equipment covers the machines used to prepare reinforcement steel for concrete construction — primarily bending (shaping straight bar into hooks, stirrups, and L-bends per structural drawings) and cutting (shearing bar to exact lengths).
Get it right and your reinforcement cage assembles cleanly, structural inspections pass, and the concrete pour happens on schedule. Get it wrong and you're cutting bar twice, hand-bending stirrups that should have been machine-shaped, or slowing the whole pour sequence because the rebar isn't ready when the concrete is. On commercial timelines, the machine's accuracy and reliability compound into days of saved labour across a project.
That's the practical case for buying a proper rebar machine rather than renting or improvising. The bigger case is structural — modern reinforcement drawings specify bend radii and cut tolerances that hand-bending can't reliably hit. Machines do.
The Baylorr P-42 is our flagship rebar bender — the unit most UAE reinforcement yards and large-site contractors choose for continuous-production bending work. 3-phase operation, hydraulic-powered, designed for the 32–42 mm rebar class that dominates residential and commercial structural work.
Full BAY-P42 product page + quote → rebar bending machine UAE
The Baylorr RB25 is our single-phase alternative — built for smaller contractors, temporary site shops, and residential-scale work where 3-phase power isn't available or isn't needed. Lower rebar capacity than the P-42, but perfectly sized for the villa and small commercial work that makes up the bulk of UAE residential construction.
Full RB25 product page + quote → single phase rebar bending machine
The Baylorr C-42 is our standard rebar cutter — paired with the P-42 bending machine for most reinforcement operations. Hydraulic-powered, fixed-blade shear design, built for accurate cut-to-length work on rebar from 8 mm up to 42 mm diameter.
Cutting machines pair with bending machines in most reinforcement workflows — cut to length first, then bend per schedule. Buying both as a pair is standard for yards or sites running dedicated rebar operations.
Full C-42 product page + quote → rebar cutting machine
AMACO is the exclusive UAE distributor for EdilPro, a specialist rebar processing brand. This matters because:
EdilPro machines are designed to international construction standards. The kind of engineering tolerance, metallurgy, and build quality that changes how the machine performs year after year — not just on day one.
If you want an EdilPro machine in the UAE, you come through us. Buying grey-market through third-country resellers means no valid warranty, slower spare parts supply, and service from technicians who've never seen the machine.
Our current EdilPro range covers their rebar processing line. Additional EdilPro product categories are scheduled for late 2026.
EdilPro UAE →The first decision is power. 3-phase machines (like the Baylorr P-42 and C-42) are faster, handle larger rebar diameters, and are purpose-built for continuous work — but they need 3-phase electrical supply on site. Single-phase machines (like the Baylorr RB25) plug into standard 220 V sockets — more portable, cheaper to install, but with lower throughput and smaller max rebar size.
Both are good machines. The positioning is different:
Many UAE contractors start with the Baylorr line and move to EdilPro as volume grows and reliability demands increase.
Most rebar operations buy a bending machine and a cutting machine as a pair — the cutter handles length, the bender handles shape, both feed the same reinforcement cage. If you're setting up a new rebar operation, pricing the P-42 + C-42 together usually beats buying separately.
Deep-dive buying guide → how to choose rebar bending machine
Our rebar machines (P-42, RB25, C-42) are manufactured under an ISO 9001 quality management regime. Documented, auditable consistency batch-to-batch — not a marketing claim. Certificate available for project documentation on request.
The only UAE route to EdilPro rebar equipment with valid warranty, manufacturer parts support, and local service backing.
Baylorr rebar machines delivery within 48 hours of order confirmation. EdilPro UAE-stock units deliver at the same pace; special-order EdilPro models quote separately based on Italy-to-UAE shipping schedules.
Rebar bending machines hit hard and eventually break. Our Ajman workshop handles hydraulic cylinder service, blade replacement, electric motor rewind, frame weld repair. Two-day turnaround on most jobs. Genuine Baylorr spares stocked.
rebar machine repair service →Three years of UAE site feedback baked into every Baylorr rebar machine. Blade geometry, hydraulic coupling positions, control panel layouts — adjusted based on what was coming back to our workshop most often.
Baylorr UAE →Dubai is our main sales territory for rebar equipment. 24–48 hour delivery to most Dubai construction sites. On-site repair support for reinforcement operations that can't move machines to Ajman.
construction equipment Dubai →Regular delivery to Abu Dhabi reinforcement yards and contractor sites. 48–72 hour typical lead time. Repair work handled in-shop at our Ajman facility.
construction equipment Abu Dhabi →Visit our Ajman showroom to see the Baylorr P-42 in person. Walk in 9am–7pm — AL JURF, Jiddah Street, Ajman Industrial 2. Short workshop demo usually arrangeable during business hours.
construction equipment Ajman →Full delivery coverage across Sharjah emirate. Drop off at our Ajman workshop for repairs or take advantage of UAE-wide delivery on new units.
construction equipment Sharjah →Real product photos — the BAY-P42 flagship bender, RB25 single-phase, C-42 cutter, and our stirrup ring-bending machines on the workshop floor.
Every rebar bender and cutter AMACO holds in our Ajman warehouse — Baylorr's full hydraulic line plus the EdilPro premium machine. Click any product for full specs and a WhatsApp quote.
See the full catalogue across all categories → all AMACO products
Whether you need a P-42 for a new reinforcement yard, an RB25 for a villa site, a C-42 cutter to pair with an existing bender, or an EdilPro special-order unit for premium work — we can quote delivered price and turnaround the same day.
