Baylorr BAY-C55 Heavy-Duty Bar Cutter

Product Description

The Baylorr BAY-C55 is a high-capacity rebar cutting machine for projects where standard cutters reach their limit. It shears round bars up to 50mm and deformed bars up to 45mm at 32 cuts per minute, driven by a 5.5 kW (7.5 HP) motor at 2,800 rpm on three-phase 380VAC supply. The reinforced blade housing provides the additional torque needed to cut thick, high-tensile steel cleanly rather than crushing or deforming the bar end. Cut quality matters more on large-diameter steel than most buyers expect. A rebar cutter working beyond its comfortable capacity produces ragged, flared bar ends that will not sit correctly in couplers, foul formwork and shutter faces, and make accurate lapping difficult. The C55's reinforced housing holds blade alignment under the forces generated by 45mm deformed bar, so the cut face stays square and the bar is ready to place without dressing. Over a full bar schedule that difference is measured in hours of avoided rework. This steel bar cutting machine is standard equipment on heavy infrastructure work — bridges, flyovers, pile caps, raft foundations and large structural elements where 40mm and 45mm reinforcement is routine. Prefabrication plants and rebar fabrication yards supplying cut-and-bent steel to UAE contractors run it as the primary cutting machine, with 32 cuts per minute keeping pace with continuous production. It cuts smaller diameters equally well, so a single machine can cover the full schedule. The C55 suits rebar fabrication contractors, precast manufacturers and main contractors self-performing reinforcement on major civils packages. Where your schedule tops out around 32mm deformed bar, the BAY-C42 covers that range at a lower price point. For spark-free precision cutting of structural sections and profiles rather than reinforcement, the BAY-FA355 metal cold cut saw handles round, square, rectangular and angle sections. Matching bending capacity is available in the BAY-P55 bar bending machine, which bends 50mm round bar. AMACO supplies this rebar cutting machine across the UAE from our workshop at Al Jurf Industrial Area 2, Ajman, with delivery to Dubai, Sharjah, Abu Dhabi and the Northern Emirates. Cutting machines at this capacity are worked hard and blades, bearings and motors are consumable over time — our in-house service department covers motor rewinding, blade replacement, mechanical overhaul and electrical repair, so a fault means a local repair rather than weeks of downtime. Spare parts, annual maintenance contracts and on-site breakdown support are available throughout the Emirates. Contact AMACO on WhatsApp or by phone for current bar cutting machine pricing, specification confirmation and delivery lead time.