Baylorr · BAY-TM-H
Baylorr BAY-TM-H Tamping Rammer
The Baylorr BAY-TM-H is a 4-stroke petrol tamping rammer built for cohesive soils, narrow trenches, and confined urban work where a plate compactor can't reach.
~78 kg
Weight
13–14 kN
Impact
60 cm
Compaction depth
- 1-Year Warranty
- Ajman Workshop Repair
- Genuine Baylorr Parts
BAY-TM-H
Overview
Cohesive-soil rammer for trenches & confined work
The Baylorr BAY-TM-H is a 4-stroke petrol tamping rammer built for cohesive soils, narrow trenches, and confined urban work where a plate compactor can't reach.
Quick Specifications
BAY-TM-H At a Glance
Specification — Baylorr BAY-TM-H Tamping Rammer
- Model
- BAY-TM-H
- Brand
- Baylorr
- Weight
- ~78 kg
- Foot size
- 285 × 330 mm
- Engine
- 4-stroke petrol
- Impact force
- 13–14 kN
- Jump height
- 50–85 mm
- Compaction depth
- Up to 60 cm per pass
- Warranty
- 1 year on manufacturing defects
- Delivery
- 48 hours UAE-wide
- Category
- Petrol tamping rammer (trench compactor)
- Frequency
- ~600–700 strokes per minute
Applications
What the BAY-TM-H Is Used For
- Narrow trenches under 40 cm width
- Clay silt and cohesive soils where vibration alone won't compact
- Deep compaction passes — rammer hits harder than a plate
- Foundation prep under strip footings
- Utility line backfill in constrained urban work
Real Photos
BAY-TM-H Gallery
Buyer Questions
Frequently Asked Questions
Pricing depends on current promotions and stock. Request a current quote via WhatsApp on +971 50 428 0861 or call +971 42 39 39 07.
Delivery anywhere in the UAE typically completes within 48 hours of order confirmation from our Ajman warehouse.
A tamping rammer hits with vertical impact force — best for cohesive soils (clay, silt) and deep compaction in narrow trenches. A plate compactor uses vibration with forward travel — best for granular soils (sand, gravel) on open areas. The BAY-TM-H is the trench tool; the BAY-PC90C is the open-area tool.
Cohesive soils — clay, silty clay, sandy clay — and mixed fill. Vibration alone fails in these soils because the particles don't shake into place; only impact force compresses them.
Up to 60 cm per pass in cohesive soils — significantly deeper than any plate compactor. The deep reach is what makes the rammer essential for trench backfill, foundation prep, and utility line bedding.
Yes — the 285 × 330 mm foot fits trenches as narrow as 40 cm. Tighter trenches need a smaller rammer; we can quote alternatives if needed.
Petrol — 4-stroke. Petrol is the standard for tamping rammers because mains power is rarely available in trenches and because the impact-cycle loading is too rough for cordless electric in current technology.
Approximately 78 kg. Two-person lift to load on a vehicle is recommended. The wheel-on-handle design allows one-person manoeuvring on flat ground.
Workshop repair is faster for tamping rammers (the engine and impact mechanism are easier to service in-shop). For active-site breakdowns we can quote on-site service. Standard 2-day turnaround at our Ajman workshop.
Yes. Walk in to our Ajman showroom — AL JURF, Jiddah Street, Ajman Industrial 2 — 9am to 6pm, six days a week. Demo unit on the workshop floor.
Order the BAY-TM-H
Quotes typically returned within an hour during business hours.
Request BAY-TM-H Quote →