Leadermec Cutting Machine C44 PRO

Product Description

The Leadermec C44 PRO is an Italian rebar cutting machine built by ICARO s.r.l around a nodular cast iron monoblock housing. It cuts a single Ø34mm bar in 65 kg/mm² steel, two Ø28mm bars or three Ø18mm bars per stroke, at 50 cuts per minute from a 5.5 HP (4 kW) motor. The machine weighs 420 kg and measures 100 × 60 × 80 cm, with a phase control and sequence relay fitted as standard on CE models. At 50 cuts per minute, the C44 PRO is the fastest machine in the Leadermec cutting range — the trade-off against the larger C54 PRO is maximum bar diameter rather than output. For fabricators whose schedules are dominated by 16mm to 28mm reinforcement, which describes most commercial and residential work, that speed converts directly into daily throughput. The monoblock casting holds blade alignment and bearing tolerances that a welded fabricated housing cannot match over years of service, and keeps every component interchangeable. The balanced flywheel-to-gearbox ratio delivers shearing energy as a smooth stroke rather than a shock load, which protects both the blade and the drive train. The operator works from the side opposite the blade, and the phase control and sequence relay guards the motor against reverse rotation and phase loss — a genuine hazard on sites running temporary supplies or generator power, where a miswired connection can destroy a motor immediately. At 420 kg and 100 × 60 × 80 cm, the C44 PRO is compact enough for a site cutting area as well as a fabrication yard — smaller in footprint and weight than the C54 PRO while keeping the same construction standard. Steel fixing subcontractors, rebar fabrication yards and main contractors cutting their own reinforcement are the natural users. Where Ø46mm capacity is required, the C54 PRO covers it; matching bending capacity is available in the Leadermec P44 PRO at Ø38mm and the P54 PRO at Ø44mm. AMACO supplies and services Leadermec machines throughout the UAE from our workshop at Al Jurf Industrial Area 2, Ajman, delivering to Dubai, Sharjah, Abu Dhabi and the Northern Emirates. Our in-house service department covers motor rewinding, gearbox overhaul, blade service, electrical fault-finding and mechanical repair, so this machine is supported locally for its full working life. Spare parts, annual maintenance contracts and on-site breakdown support are available across the Emirates. Contact AMACO on WhatsApp or by phone for C44 PRO pricing, full specifications and delivery lead time.