Leadermec Cutting Machine C54 PRO

Product Description

The Leadermec C54 PRO is a heavy-duty rebar cutting machine manufactured in Italy by ICARO s.r.l. It shears a single Ø46mm bar in 65 kg/mm² steel, two Ø32mm bars or three Ø24mm bars per stroke, at 40 cuts per minute from a 5.5 HP (4 kW) motor. The housing is a single nodular cast iron monoblock, the machine weighs 650 kg, and a phase control and sequence relay is fitted as standard on CE models. Monoblock construction is the defining feature. Most bar cutting machines use a fabricated steel housing — plates cut and welded together, which accumulates tolerance error at every joint and can distort under sustained shearing loads. The C54 PRO's housing is cast as one piece in nodular iron, so blade alignment and bearing positions are held to tighter tolerances from new and stay there. Components are fully interchangeable, and the flywheel-to-gearbox ratio is balanced to deliver shearing energy smoothly rather than in a shock load. On a machine cutting large-diameter bar at 40 cuts per minute, that construction is what determines service life. Safety is built into the layout and the electrics. The operator stands opposite the cutting zone rather than beside it, and the phase control and sequence relay protects the motor against reverse rotation and phase loss — a real risk on UAE sites running off temporary supplies and generators, where a reversed phase can destroy a motor in seconds. At 650 kg this is fixed fabrication equipment for rebar yards and infrastructure projects cutting large-diameter bar at volume. Multi-bar capacity — three Ø24mm bars per stroke — is where the throughput gain is realised on repetitive cut schedules. Fabricators supplying cut-and-bent reinforcement to major UAE civils projects are the natural users. Matching bending capacity is available in the Leadermec P54 PRO at Ø44mm, and the C44 PRO covers the same build quality at Ø34mm and 50 cuts per minute for lighter structural work. AMACO supplies and services Leadermec machines across the UAE from our workshop at Al Jurf Industrial Area 2, Ajman, with delivery to Dubai, Sharjah, Abu Dhabi and the Northern Emirates. Our in-house service department covers motor rewinding, gearbox and mechanical overhaul, blade service and electrical repair — so an Italian-built rebar cutting machine bought here is maintained here rather than shipped abroad. Spare parts, annual maintenance contracts and on-site breakdown support are available throughout the Emirates. Contact AMACO on WhatsApp or by phone for C54 PRO pricing, specification confirmation and current delivery lead time.