Leadermec Bending Machine P44 PRO

Product Description

The Leadermec P44 PRO is an Italian rebar bending machine manufactured by ICARO s.r.l for everyday structural reinforcement work. It bends a single Ø38mm bar in 65 kg/mm² steel, two Ø30mm bars or three Ø24mm bars per cycle, at seven bends per minute. A 4 HP (3 kW) motor drives the gearbox directly with no belts, through a 325mm working disc with double-bend capability. The machine weighs 480 kg and measures 105 × 95 × 105 cm. The belt-free direct drive is the reason to choose this bar bending machine over cheaper alternatives. Belt-driven benders lose torque as belts stretch, slip under heavy bar, and require periodic tensioning and replacement — all of which costs output and maintenance time. Direct coupling from motor to gearbox holds bending speed constant at seven bends per minute regardless of how long the machine has been in service, and removes a recurring consumable from the maintenance schedule entirely. A complete bush set from Ø50 to Ø100mm ships with the machine, along with a checking block, stirrup pin, three bush holding pins, a square pin, foot pedal and Allen key set. That accessory range covers hooks, cranks, standard bends and stirrup shapes across the diameters this steel bar bending machine handles, so the full bar schedule can be produced without sourcing additional tooling. The 24V low-voltage control panel keeps operator controls at safe voltage in a working bending bay. At 480 kg, the P44 PRO is fabrication yard equipment suited to contractors producing bars for columns, beams, slabs and footings — the routine structural reinforcement that makes up the bulk of most bar schedules. Multi-bar capacity, three Ø24mm bars in a single cycle, is where the throughput gain sits on repetitive work. Where diameters run heavier, the P54 PRO extends single-bar capacity to Ø44mm with a larger 395mm disc. Matching cutting is available in the Leadermec C44 PRO at Ø34mm and 50 cuts per minute, or the C54 PRO at Ø46mm. AMACO supplies and services Leadermec machines throughout the UAE from our workshop at Al Jurf Industrial Area 2, Ajman, delivering to Dubai, Sharjah, Abu Dhabi and the Northern Emirates. An Italian-built rebar bending machine is a long-term investment, and our in-house service department covers gearbox overhaul, motor rewinding, electrical fault-finding and mechanical repair so it is maintained locally rather than shipped abroad or replaced. Spare parts, annual maintenance contracts and on-site breakdown support are available across the Emirates. Contact AMACO on WhatsApp or by phone for P44 PRO pricing, full specifications and current delivery lead time.